The remotes for the Fire Stick and other Fire TV devices are a little different from the standard fare. It can be challenging to determine why your Fire Stick remote suddenly stopped functioning, but these seven tips should assist.
Is There a Way to Fix a Broken Fire Stick Remote?
A Fire Stick remote’s inability to function or its unexpected termination are both possible outcomes. Battery failure, obstacles in the path of the remote’s signal, and electronic interference are the most typical causes of failure. If everything else fails, try returning your Fire Stick to its original configuration.
The most typical issues that cause a Fire Stick remote to stop functioning are as follows:
- Most frequently, dead batteries are at blame when a Fire Stick remote stops responding. A Fire Stick remote may stop functioning due to improper battery insertion, low battery, or another similar issue.
- The Fire Stick will not function without a linked remote. Always remember to pair a replacement remote before using it.
- The theoretical range of a Fire Stick remote is 30 feet because it uses Bluetooth rather than infrared to transmit signals. In practice, a narrower band holds true.
- You don’t require a clear line of sight between your Fire Stick and remote, but walls and other objects will greatly diminish the signal strength.
- Interference: Bluetooth connections can be disrupted by devices like cell phones and baby monitors.
- Check for compatibility if you’ve bought a replacement remote for your Fire Stick.
- Internal issues due to failing components or external damage, such as water damage, can render your Fire Stick remote inoperable.
Battery Life Issues With Your Fire Stick Remote?
The most common cause of a non-functioning Fire Stick remote is a dead battery. The primary difficulty is that, unlike conventional infrared remotes, Fire Stick remotes rely on Bluetooth to control the device.
If your Fire Stick remote suddenly stops working, here’s how to determine whether or not the batteries are dead:
- Take the Remote for Your Fire Stick and Remove the Batteries.
- Make sure the batteries weren’t placed in the wrong way around. Replace them if they were installed backward and give the remote another shot.
- Change the batteries.
- If that doesn’t work, swap out the batteries in the remote.
- It’s unlikely that the batteries are dead if the remote still doesn’t function.
Fixing Issues Caused by Remote Pairing
Any new Fire Stick or Fire TV device you purchase should have its included remote pre-paired. This implies that you shouldn’t have to do anything special to get your Fire Stick or Fire TV to recognize inputs from the remote when you first set it up.
It’s possible that your Fire Stick and remote never paired, or that the pairing somehow broke down over time. When that happens, having the remote serviced is typically the only solution.
Pairing a Fire Stick remote is as follows:
- Make sure the power is on and the Fire Stick is plugged in.
- Please be patient while the Fire TV loads.
- Keep the Fire Stick’s remote in close proximity.
- Hold down the Home button on the Fire TV controller.
- Maintain your 10-second minimum hold on the Home button.
- Let go of the Home button and test the remote’s functionality.
- If pressing the Home button on the remote still has no effect, try pressing it again. This method isn’t always successful on the first try.
Read More: What is FMovies? Is it Legal or Not in 2023?
Rule Out Distance and Obstruction Problems With Fire TV Remotes
Instead of infrared, the remote controls for the Fire Stick and Fire TV use Bluetooth to communicate with the respective devices.
Since the strength of the Bluetooth signal has nothing to do with the orientation of the remote, there’s no need to even aim the remote at your device.
There are a number of factors that can restrict the effective range of a Bluetooth device, such as the Fire Stick remote, from its theoretical maximum of around 30 feet.
The remote’s range will be greatly diminished if there are any obstacles between it and the Fire Stick or Fire TV.
Here’s how To Check Whether Distance or Obstructions Are Your Problems:
- Get closer to your Fire Stick by bringing the remote closer to it.
- Get rid of anything that could be blocking the remote’s signal to the Fire Stick.
- Use the Fire Stick extension dongle to move the device if the remote only functions when you are standing behind or extremely near the TV.
- To test the remote’s functionality, take your Fire TV device out of any enclosures, such as an entertainment center, and try to use it again.
Fire Stick Remotes and Interference
Not having a direct line of sight between the remote and the Fire Stick prevents the remote from operating, but just decreases the range with Bluetooth. However, unlike infrared remote controls, Bluetooth remotes can be disrupted by ambient noise.
Make sure none of the following is within range of your Fire Stick:
- Appliances that use microwave technology
- Mobile audio system
- Coaxial cables without shielding
- Bluetooth devices
- Mobile audio system
- Extra wireless stuff
Try relocating any nearby WiFi or Bluetooth sources that may be interfering with your Fire Stick’s performance. If you can’t do that, try turning them off and unplugging them one by one to see if that solves the problem and lets you use your Fire Stick remote again.
That should help you pinpoint the cause of the disturbance so you can eliminate it.
Fire Stick Remote Compatibility
A compatibility issue could be at blame if you recently bought a replacement Fire Stick remote but were unable to sync it with your TV.
Fire Sticks, other Fire TV devices, and Fire TV remotes have been produced over the years, and they do not always communicate with one another. Make sure the remote controls’ compatibility with your model is specified in the product description.
Read More: How To Transfer Your Data Using Samsung Smart Switch? The Ultimate Guide in 2023!
Try Using the Fire TV Phone App
If you’ve tried everything and still can’t get your Fire TV remote to work, it may be broken or malfunctioning.
In such a situation, you should probably just go out and buy a new remote. Meanwhile, you can use your smartphone as a remote for your Fire Stick or Fire TV by downloading an app.
Installing the Fire TV remote app on your phone is required for the remote control of your Fire TV device. The source is as follows:
- Google Play has a Fire TV control app for Android devices.
- App Store, Apple TV remote control for Fire TV.
- The Amazon app store features a Kindle-compatible Fire TV control app.
To Use It with Your Fire Stick or Fire Tv, Follow These Steps:
- Connect your Fire Stick or Fire TV to an electrical outlet and power it on.
- Launch the Fire TV control app after downloading it.
- Enter your Amazon credentials into the Fire TV app on your remote.
- Choose your Fire TV player from the app’s device menu.
- You’ll need to keep an eye on the TV for a code, then punch that number into the app.
- Now you can use your phone as a remote for your Fire TV.